Logging und Vorbereitung MAPPING wie in taskFLOW

Refactored project references to use new DDModules paths and updated third-party DLL locations. Migrated GUIs.Test.EDMIBenchmark to NuGet-based dependency management, adding packages.config and binding redirects for key assemblies. Replaced Office COM interop with direct assembly references. Integrated GdPicture via NuGet and removed redundant hardcoded references. These changes improve maintainability, portability, and project structure.

Base/Base.vbproj

@@ -76,6 +76,7 @@
   <ItemGroup>
     <Compile Include="Base\BaseClass.vb" />
     <Compile Include="Base\BaseUtils.vb" />
+    <Compile Include="DocumentPathHandler.vb" />
     <Compile Include="ECM\ECM.vb" />
     <Compile Include="Encryption\Compression.vb" />
     <Compile Include="Encryption\Encryption.vb" />
@@ -86,6 +87,7 @@
     <Compile Include="FileWatcher\FileWatcherFilters.vb" />
     <Compile Include="FileWatcher\FileWatcherProperties.vb" />
     <Compile Include="IDB\Constants.vb" />
+    <Compile Include="Map_Drive.vb" />
     <Compile Include="MimeEx.vb" />
     <Compile Include="StringFunctions.vb" />
     <Compile Include="WindowsEx.vb" />

Base/DocumentPathHandler.vb

@@ -0,0 +1,346 @@
+Imports System.IO
+Imports DigitalData.Modules.Logging
+''' <summary>
+''' Zentrale Klasse für Dokumentenpfad-Verwaltung mit optionalem Laufwerks-Mapping und Temp-Kopie
+''' </summary>
+Public Class DocumentPathHandler
+
+    Private ReadOnly _Logger As Logger
+    Private ReadOnly _LogConfig As LogConfig
+    Private _mappedDrive As String = ""
+    Private _clsmapDrive As Map_Drive
+
+    Public Sub New(LogConfig As LogConfig)
+        _LogConfig = LogConfig
+        _Logger = LogConfig.GetLogger()
+        _clsmapDrive = New Map_Drive(LogConfig)
+    End Sub
+
+    Private Function EnsureTempFolder(ByRef tempFolder As String, ByRef errorMessage As String) As Boolean
+        Try
+            _Logger.Debug($"📂 Überprüfe Temp-Ordner: [{tempFolder}]")
+            If String.IsNullOrWhiteSpace(tempFolder) Then
+                _Logger.Debug("⚠️ Temp-Ordner nicht konfiguriert, verwende TEMP_DOCUMENT_FOLDER aus AppSettings")
+                tempFolder = TEMP_DOCUMENT_FOLDER
+            End If
+
+            ' Fallback, falls global nichts konfiguriert ist
+            If String.IsNullOrWhiteSpace(tempFolder) Then
+                tempFolder = Path.Combine(
+                Environment.GetFolderPath(Environment.SpecialFolder.LocalApplicationData),
+                "Digital Data",
+                "taskFLOW",
+                "DocumentViewer",
+                "Temp")
+                _Logger.Info($"⚠️ TEMP_DOCUMENT_FOLDER war leer - verwende Fallback: [{tempFolder}]")
+                TEMP_DOCUMENT_FOLDER = tempFolder
+            End If
+
+            If Not Directory.Exists(tempFolder) Then
+                Directory.CreateDirectory(tempFolder)
+                _Logger.Info($"📁 Temp-Ordner erstellt: [{tempFolder}]")
+            End If
+
+            If Not Directory.Exists(tempFolder) Then
+                errorMessage = $"Temp-Ordner konnte nicht erstellt werden: [{tempFolder}]"
+                Return False
+            End If
+
+            Return True
+
+        Catch ex As Exception
+            errorMessage = $"Fehler bei Temp-Ordner-Initialisierung: {ex.Message}"
+            _Logger.Error($"❌ {errorMessage}")
+            _Logger.Error(ex)
+            Return False
+        End Try
+    End Function
+    ''' <summary>
+    ''' Verarbeitet einen Dokumentenpfad: Optional Mapping, dann Temp-Kopie
+    ''' </summary>
+    ''' <param name="sourcePath">Quell-Pfad der Datei (UNC oder lokal)</param>
+    ''' <param name="options">Optionen für die Verarbeitung</param>
+    ''' <returns>DocumentPathResult mit finalem Pfad und Mapping-Info</returns>
+    Public Function ProcessDocumentPath(sourcePath As String, options As DocumentPathOptions) As DocumentPathResult
+        Dim result As New DocumentPathResult With {
+            .SourcePath = sourcePath,
+            .FinalPath = sourcePath,
+            .Success = False,
+            .WasMapped = False,
+            .WasCopiedToTemp = False
+        }
+
+        Try
+            ' Validierung
+            If String.IsNullOrEmpty(sourcePath) Then
+                result.ErrorMessage = "Quell-Pfad ist leer"
+                _Logger.Error("❌ ProcessDocumentPath: Quell-Pfad ist leer")
+                Return result
+            End If
+
+            Dim workingPath As String = sourcePath
+
+            ' ========== SCHRITT 1: OPTIONALES LAUFWERKS-MAPPING ==========
+            If options.EnableMapping AndAlso Not String.IsNullOrEmpty(options.WMSuffix) Then
+                Dim mappingResult = TryMapNetworkDrive(sourcePath, options)
+                If mappingResult.Success Then
+                    workingPath = mappingResult.MappedPath
+                    _mappedDrive = mappingResult.DriveLetter
+                    result.WasMapped = True
+                    result.MappedDrive = _mappedDrive
+                    _Logger.Info($"✓ Laufwerk gemappt: {_mappedDrive}")
+                Else
+                    _Logger.Warn("⚠️ Laufwerks-Mapping fehlgeschlagen - verwende Original-UNC-Pfad")
+                    workingPath = sourcePath
+                End If
+            End If
+
+            ' ========== SCHRITT 2: PRÜFEN OB DATEI EXISTIERT ==========
+            If Not File.Exists(workingPath) Then
+                result.ErrorMessage = $"Datei nicht gefunden: [{workingPath}]"
+                _Logger.Error($"❌ {result.ErrorMessage}")
+
+                ' Cleanup bei Fehler
+                If result.WasMapped Then
+                    UnmapDrive()
+                End If
+
+                Return result
+            End If
+
+            ' ========== SCHRITT 3: OPTIONALE TEMP-KOPIE ==========
+            If options.CopyToTemp Then
+                _Logger.Debug($"📂 Starte Temp-Kopie für: [{workingPath}]")
+                Dim tempResult = CopyToTempFolder(workingPath, options.TempFolder)
+                If tempResult.Success Then
+                    result.FinalPath = tempResult.TempPath
+                    result.WasCopiedToTemp = True
+                    result.TempPath = tempResult.TempPath
+                    _Logger.Info($"✓ Datei in Temp kopiert: [{Path.GetFileName(tempResult.TempPath)}]")
+
+                    ' Laufwerk unmappen nach erfolgreicher Kopie
+                    If result.WasMapped AndAlso options.UnmapAfterCopy Then
+                        UnmapDrive()
+                        result.WasMapped = False
+                    End If
+                Else
+                    _Logger.Warn($"⚠️ Temp-Kopie fehlgeschlagen: {tempResult.ErrorMessage}")
+
+                    ' WICHTIG: Nicht den gemappten Pfad behalten, wenn danach ungemappt wird.
+                    ' Fallback immer auf stabilen Originalpfad (UNC).
+                    result.FinalPath = sourcePath
+                    result.WasCopiedToTemp = False
+                    result.TempPath = String.Empty
+
+                    If result.WasMapped Then
+                        UnmapDrive()
+                        result.WasMapped = False
+                    End If
+                End If
+            Else
+                result.FinalPath = workingPath
+                _Logger.Debug($"📄 Verwende Pfad ohne Temp-Kopie: [{workingPath}]")
+            End If
+
+            result.Success = True
+            Return result
+
+        Catch ex As Exception
+            result.ErrorMessage = $"Unerwarteter Fehler: {ex.Message}"
+            _Logger.Error($"❌ ProcessDocumentPath: {ex.Message}")
+            _Logger.Error(ex)
+
+            ' Cleanup bei Exception
+            If result.WasMapped Then
+                UnmapDrive()
+            End If
+
+            Return result
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Versucht ein Netzlaufwerk zu mappen
+    ''' </summary>
+    Private Function TryMapNetworkDrive(sourcePath As String, options As DocumentPathOptions) As MappingResult
+        Dim result As New MappingResult With {.Success = False}
+
+        Try
+            ' Prüfen ob Pfad mit WMSUFFIX beginnt
+            If Not sourcePath.StartsWith(options.WMSuffix, StringComparison.OrdinalIgnoreCase) Then
+                _Logger.Debug($"📄 Pfad beginnt nicht mit WMSUFFIX - kein Mapping erforderlich")
+                Return result
+            End If
+
+            _Logger.Debug($"📂 WMSUFFIX erkannt - starte Laufwerks-Mapping")
+
+            ' Laufwerk mappen
+            Dim mappedDrive As String = ""
+
+            If Not String.IsNullOrEmpty(options.SpecificDrive) AndAlso options.SpecificDrive.Length = 1 Then
+                ' Spezifisches Laufwerk
+                If _clsmapDrive.MapSpecificDrive(options.SpecificDrive, options.DriveBlacklist, options.WMSuffix) Then
+                    mappedDrive = options.SpecificDrive & ":"
+                End If
+            Else
+                ' Automatisches Mapping
+                mappedDrive = _clsmapDrive.MapDriveAutomatic(options.DriveBlacklist, options.WMSuffix)
+            End If
+
+            If String.IsNullOrEmpty(mappedDrive) Then
+                _Logger.Warn("⚠️ Kein Laufwerk gemappt")
+                Return result
+            End If
+
+            ' Pfad umschreiben
+            Dim relativePath As String = sourcePath.Substring(options.WMSuffix.Length)
+            If relativePath.StartsWith("\") Then
+                relativePath = relativePath.Substring(1)
+            End If
+
+            Dim mappedPath As String = mappedDrive.TrimEnd(":"c, "\"c) & ":\" & relativePath
+
+            _Logger.Debug($"📄 Original: [{sourcePath}]")
+            _Logger.Debug($"📄 Gemappt:  [{mappedPath}]")
+
+            result.Success = True
+            result.DriveLetter = mappedDrive
+            result.MappedPath = mappedPath
+            Return result
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler beim Mapping: {ex.Message}")
+            _Logger.Error(ex)
+            Return result
+        End Try
+    End Function
+
+    Private Function CopyToTempFolder(sourcePath As String, tempFolder As String) As TempCopyResult
+        Dim result As New TempCopyResult With {.Success = False}
+
+        Try
+            Dim configuredTempFolder As String = tempFolder
+            Dim globalTempFolder As String = TEMP_DOCUMENT_FOLDER
+
+            ' Temp-Ordner validieren/initialisieren (kann tempFolder per ByRef setzen)
+            If Not EnsureTempFolder(tempFolder, result.ErrorMessage) Then
+                _Logger.Warn($"⚠️ {result.ErrorMessage}")
+                _Logger.Warn($"[TempCopy] InputTemp=[{If(String.IsNullOrWhiteSpace(configuredTempFolder), "<leer>", configuredTempFolder)}], GlobalTemp=[{If(String.IsNullOrWhiteSpace(globalTempFolder), "<leer>", globalTempFolder)}]")
+                Return result
+            End If
+
+            ' NEU: Effektiven Zielordner immer transparent loggen
+            _Logger.Info($"[TempCopy] Effektiver Temp-Ordner: [{tempFolder}]")
+            _Logger.Debug($"[TempCopy] InputTemp=[{If(String.IsNullOrWhiteSpace(configuredTempFolder), "<leer>", configuredTempFolder)}], GlobalTemp=[{If(String.IsNullOrWhiteSpace(globalTempFolder), "<leer>", globalTempFolder)}]")
+
+            ' Eindeutigen Dateinamen generieren
+            Dim originalFileName As String = Path.GetFileName(sourcePath)
+            Dim fileNameWithoutExt As String = Path.GetFileNameWithoutExtension(originalFileName)
+            Dim extension As String = Path.GetExtension(originalFileName)
+            Dim timestamp As String = DateTime.Now.ToString("yyyyMMdd_HHmmss_fff")
+            Dim uniqueFileName As String = $"{fileNameWithoutExt}_{timestamp}{extension}"
+            Dim targetPath As String = Path.Combine(tempFolder, uniqueFileName)
+
+            _Logger.Debug($"📄 Kopiere nach Temp:")
+            _Logger.Debug($"   Von:  [{sourcePath}]")
+            _Logger.Debug($"   Nach: [{targetPath}]")
+
+            File.Copy(sourcePath, targetPath, overwrite:=True)
+
+            result.Success = True
+            result.TempPath = targetPath
+            result.TempFileName = uniqueFileName
+            Return result
+
+        Catch ex As Exception
+            result.ErrorMessage = $"Fehler beim Kopieren: {ex.Message}"
+            _Logger.Error($"❌ {result.ErrorMessage}")
+            _Logger.Error(ex)
+            Return result
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Trennt das gemappte Laufwerk
+    ''' </summary>
+    Public Sub UnmapDrive()
+        If Not String.IsNullOrEmpty(_mappedDrive) Then
+            Try
+                If _clsmapDrive.DisconnectNetworkDrive(_mappedDrive, force:=True) Then
+                    _Logger.Info($"🔌 Laufwerk {_mappedDrive} getrennt")
+                Else
+                    _Logger.Warn($"⚠️ Warnung beim Trennen von {_mappedDrive}")
+                End If
+            Catch ex As Exception
+                _Logger.Debug($"Fehler beim Trennen von {_mappedDrive}: {ex.Message}")
+            Finally
+                _mappedDrive = ""
+            End Try
+        End If
+    End Sub
+
+    ''' <summary>
+    ''' Cleanup-Methode (z.B. beim Schließen des Forms)
+    ''' </summary>
+    Public Sub Cleanup()
+        UnmapDrive()
+    End Sub
+
+#Region "Nested Classes für Optionen und Ergebnisse"
+
+    ''' <summary>
+    ''' Optionen für die Dokumentenpfad-Verarbeitung
+    ''' </summary>
+    Public Class DocumentPathOptions
+        ''' <summary>Soll Laufwerks-Mapping versucht werden?</summary>
+        Public Property EnableMapping As Boolean = False
+
+        ''' <summary>WMSUFFIX für Mapping-Erkennung (z.B. "\\windream\objects")</summary>
+        Public Property WMSuffix As String = ""
+
+        ''' <summary>Spezifischer Laufwerksbuchstabe (z.B. "V") oder leer für automatisch</summary>
+        Public Property SpecificDrive As String = ""
+
+        ''' <summary>Blacklist für Laufwerksbuchstaben (z.B. "Y,M,V")</summary>
+        Public Property DriveBlacklist As String = ""
+
+        ''' <summary>Soll Datei in Temp kopiert werden?</summary>
+        Public Property CopyToTemp As Boolean = False
+
+        ''' <summary>Temp-Ordner-Pfad</summary>
+        Public Property TempFolder As String = ""
+
+        ''' <summary>Laufwerk nach erfolgreicher Temp-Kopie unmappen?</summary>
+        Public Property UnmapAfterCopy As Boolean = True
+    End Class
+
+    ''' <summary>
+    ''' Ergebnis der Dokumentenpfad-Verarbeitung
+    ''' </summary>
+    Public Class DocumentPathResult
+        Public Property Success As Boolean
+        Public Property SourcePath As String
+        Public Property FinalPath As String
+        Public Property ErrorMessage As String
+        Public Property WasMapped As Boolean
+        Public Property MappedDrive As String
+        Public Property WasCopiedToTemp As Boolean
+        Public Property TempPath As String
+    End Class
+
+    Private Class MappingResult
+        Public Property Success As Boolean
+        Public Property DriveLetter As String
+        Public Property MappedPath As String
+    End Class
+
+    Private Class TempCopyResult
+        Public Property Success As Boolean
+        Public Property TempPath As String
+        Public Property TempFileName As String
+        Public Property ErrorMessage As String
+    End Class
+
+#End Region
+
+End Class

Base/Map_Drive.vb

@@ -0,0 +1,559 @@
+Imports System.IO
+Imports System.Runtime.InteropServices
+Imports DigitalData.Modules.Logging
+Public Class Map_Drive
+    Private ReadOnly _Logger As Logger
+    Private ReadOnly _LogConfig As LogConfig
+#Region "Windows API Deklarationen"
+    <DllImport("mpr.dll", CharSet:=CharSet.Auto)>
+    Private Shared Function WNetAddConnection2(ByRef lpNetResource As NETRESOURCE,
+                                                ByVal lpPassword As String,
+                                                ByVal lpUsername As String,
+                                                ByVal dwFlags As Integer) As Integer
+    End Function
+
+    <DllImport("mpr.dll", CharSet:=CharSet.Auto)>
+    Private Shared Function WNetCancelConnection2(ByVal lpName As String,
+                                                    ByVal dwFlags As Integer,
+                                                    ByVal fForce As Boolean) As Integer
+    End Function
+
+    <StructLayout(LayoutKind.Sequential, CharSet:=CharSet.Auto)>
+    Private Structure NETRESOURCE
+        Public dwScope As Integer
+        Public dwType As Integer
+        Public dwDisplayType As Integer
+        Public dwUsage As Integer
+        Public lpLocalName As String
+        Public lpRemoteName As String
+        Public lpComment As String
+        Public lpProvider As String
+    End Structure
+
+    Private Const RESOURCETYPE_DISK As Integer = 1
+    Private Const CONNECT_UPDATE_PROFILE As Integer = 1
+    Private Const ERROR_SUCCESS As Integer = 0
+    Private Const ERROR_ALREADY_ASSIGNED As Integer = 85
+#End Region
+    Public Sub New(LogConfig As LogConfig)
+        _LogConfig = LogConfig
+        _Logger = LogConfig.GetLogger()
+    End Sub
+    ''' <summary>
+    ''' Struktur für Netzlaufwerk-Informationen
+    ''' </summary>
+    Public Structure NetworkDriveInfo
+        Public DriveLetter As String
+        Public NetworkPath As String
+        Public DriveType As IO.DriveType
+        Public IsReady As Boolean
+        Public TotalSize As Long
+        Public FreeSpace As Long
+    End Structure
+
+    ''' <summary>
+    ''' Ermittelt den nächsten freien Laufwerksbuchstaben (alphabetisch absteigend von Z bis A)
+    ''' </summary>
+    ''' <param name="blacklist">Liste der nicht erlaubten Laufwerksbuchstaben (z.B. "Y,M,V")</param>
+    ''' <returns>Nächster freier Laufwerksbuchstabe mit Doppelpunkt (z.B. "Z:") oder String.Empty wenn keiner frei</returns>
+    Public Function GetNextFreeDriveLetter(Optional blacklist As String = "") As String
+        Try
+            ' Blacklist verarbeiten (Großbuchstaben ohne Doppelpunkte)
+            Dim blacklistArray As New List(Of Char)
+            If Not String.IsNullOrEmpty(blacklist) Then
+                For Each item In blacklist.Split(","c)
+                    Dim letter = item.Trim().ToUpper().Replace(":", "")
+                    If letter.Length = 1 AndAlso Char.IsLetter(letter(0)) Then
+                        blacklistArray.Add(letter(0))
+                    End If
+                Next
+            End If
+
+            ' Alle aktuell verwendeten Laufwerksbuchstaben ermitteln
+            Dim usedDrives As New List(Of Char)
+            For Each drive As IO.DriveInfo In IO.DriveInfo.GetDrives()
+                Dim letter As Char = drive.Name(0)
+                usedDrives.Add(Char.ToUpper(letter))
+            Next
+
+            ' Alphabetisch absteigend von Z bis A durchgehen
+            For i As Integer = Asc("Z"c) To Asc("A"c) Step -1
+                Dim currentLetter As Char = Chr(i)
+
+                ' Prüfen ob Buchstabe verfügbar ist
+                If Not usedDrives.Contains(currentLetter) AndAlso Not blacklistArray.Contains(currentLetter) Then
+                    _Logger.Debug($"Nächster freier Laufwerksbuchstabe gefunden: {currentLetter}:")
+                    Return currentLetter & ":"
+                End If
+            Next
+
+            _Logger.Warn("Kein freier Laufwerksbuchstabe gefunden!")
+            Return String.Empty
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler beim Ermitteln des nächsten freien Laufwerksbuchstabens: {ex.Message}")
+            _Logger.Error(ex)
+            Return String.Empty
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Prüft ob ein Laufwerksbuchstabe verfügbar ist (nicht verwendet und nicht in Blacklist)
+    ''' </summary>
+    ''' <param name="driveLetter">Zu prüfender Laufwerksbuchstabe</param>
+    ''' <param name="blacklist">Liste der nicht erlaubten Laufwerksbuchstaben</param>
+    ''' <returns>True wenn verfügbar, False wenn bereits verwendet oder in Blacklist</returns>
+    Public Function IsDriveLetterAvailable(driveLetter As String, Optional blacklist As String = "") As Boolean
+        Try
+            ' Formatierung sicherstellen
+            driveLetter = driveLetter.Trim().ToUpper().Replace(":", "")
+            If driveLetter.Length <> 1 OrElse Not Char.IsLetter(driveLetter(0)) Then
+                _Logger.Warn($"Ungültiger Laufwerksbuchstabe: {driveLetter}")
+                Return False
+            End If
+
+            Dim letter As Char = driveLetter(0)
+
+            ' Blacklist prüfen
+            If Not String.IsNullOrEmpty(blacklist) Then
+                For Each item In blacklist.Split(","c)
+                    Dim blacklistedLetter = item.Trim().ToUpper().Replace(":", "")
+                    If blacklistedLetter.Length = 1 AndAlso blacklistedLetter(0) = letter Then
+                        _Logger.Debug($"Laufwerk {letter}: ist in der Blacklist")
+                        Return False
+                    End If
+                Next
+            End If
+
+            ' Prüfen ob bereits verwendet
+            For Each drive As IO.DriveInfo In IO.DriveInfo.GetDrives()
+                If Char.ToUpper(drive.Name(0)) = letter Then
+                    _Logger.Debug($"Laufwerk {letter}: ist bereits verwendet")
+                    Return False
+                End If
+            Next
+
+            Return True
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler beim Prüfen der Laufwerksverfügbarkeit: {ex.Message}")
+            _Logger.Error(ex)
+            Return False
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Mappt ein Netzlaufwerk mit automatischer Laufwerksbuchstabenwahl oder spezifischem Buchstaben
+    ''' </summary>
+    ''' <param name="driveLetter">Gewünschter Laufwerksbuchstabe (leer = automatisch den nächsten freien wählen)</param>
+    ''' <param name="networkPath">UNC-Pfad des Netzwerkshares</param>
+    ''' <param name="blacklist">Komma-getrennte Liste verbotener Laufwerksbuchstaben (z.B. "Y,M,V")</param>
+    ''' <param name="userName">Optionaler Benutzername für Authentifizierung</param>
+    ''' <param name="password">Optionales Passwort für Authentifizierung</param>
+    ''' <param name="persistent">Soll das Mapping persistent sein?</param>
+    ''' <returns>Verwendeter Laufwerksbuchstabe bei Erfolg, String.Empty bei Fehler</returns>
+    Public Function MapNetworkDrive(driveLetter As String,
+                                      networkPath As String,
+                                      Optional blacklist As String = "",
+                                      Optional userName As String = Nothing,
+                                      Optional password As String = Nothing,
+                                      Optional persistent As Boolean = True) As String
+        Try
+            Dim targetDriveLetter As String = ""
+
+            ' Szenario 1: Kein Laufwerksbuchstabe angegeben -> Automatische Auswahl
+            If String.IsNullOrEmpty(driveLetter) Then
+                _Logger.Info("Kein Laufwerksbuchstabe angegeben - suche nächsten freien Buchstaben...")
+                targetDriveLetter = GetNextFreeDriveLetter(blacklist)
+
+                If String.IsNullOrEmpty(targetDriveLetter) Then
+                    _Logger.Error("❌ Kein freier Laufwerksbuchstabe verfügbar!")
+                    Return String.Empty
+                End If
+
+                _Logger.Info($"Automatisch gewählter Laufwerksbuchstabe: {targetDriveLetter}")
+            Else
+                ' Szenario 2: Spezifischer Laufwerksbuchstabe angegeben
+                targetDriveLetter = driveLetter.Trim().ToUpper()
+                If Not targetDriveLetter.EndsWith(":") Then
+                    targetDriveLetter &= ":"
+                End If
+
+                ' ========== NEU: Prüfen ob Laufwerk verfügbar ist ==========
+                If Not IsDriveLetterAvailable(targetDriveLetter, blacklist) Then
+                    _Logger.Warn($"⚠️ Laufwerk {targetDriveLetter} ist nicht verfügbar (bereits verwendet oder in Blacklist)")
+                    ' NICHT abbrechen - weiter versuchen (alte Logik beibehalten)
+                End If
+                ' ========== ENDE NEU ==========
+            End If
+
+            ' ========== NEU: Prüfung ob Laufwerk bereits existiert ==========
+            Dim driveExists As Boolean = False
+            Try
+                Dim driveInfo As New System.IO.DriveInfo(targetDriveLetter)
+                driveExists = driveInfo.IsReady
+            Catch
+                ' Laufwerk existiert nicht - das ist OK
+                driveExists = False
+            End Try
+
+            ' Nur trennen wenn Laufwerk wirklich existiert
+            If driveExists Then
+                _Logger.Debug($"ℹ️ Laufwerk {targetDriveLetter} existiert bereits - wird getrennt")
+                DisconnectNetworkDrive(targetDriveLetter, force:=True)
+            Else
+                _Logger.Debug($"✓ Laufwerk {targetDriveLetter} existiert noch nicht - kein Disconnect nötig")
+            End If
+            ' ========== ENDE NEU ==========
+
+            ' Laufwerk mappen (bestehende Logik)
+            If MapNetworkDriveInternal(targetDriveLetter, networkPath, userName, password, persistent) Then
+                _Logger.Info($"✓ Netzlaufwerk {targetDriveLetter} erfolgreich gemappt zu {networkPath}")
+                Return targetDriveLetter
+            Else
+                _Logger.Error($"❌ Fehler beim Mappen von {targetDriveLetter}")
+                Return String.Empty
+            End If
+
+        Catch ex As Exception
+            _Logger.Error($"❌ Fehler in MapNetworkDrive: {ex.Message}")
+            _Logger.Error(ex)
+            Return String.Empty
+        End Try
+    End Function
+    ''' <summary>
+    ''' Interne Methode zum tatsächlichen Mappen eines Netzlaufwerks
+    ''' </summary>
+    Private Function MapNetworkDriveInternal(driveLetter As String,
+                                                    networkPath As String,
+                                                    userName As String,
+                                                    password As String,
+                                                    persistent As Boolean) As Boolean
+        Try
+            ' Erst trennen falls vorhanden (ohne Fehler wenn nicht vorhanden)
+            DisconnectNetworkDrive(driveLetter, True)
+
+            ' NETRESOURCE-Struktur vorbereiten
+            Dim netResource As New NETRESOURCE With {
+                .dwType = RESOURCETYPE_DISK,
+                .lpLocalName = driveLetter,
+                .lpRemoteName = networkPath
+            }
+
+            Dim flags As Integer = If(persistent, CONNECT_UPDATE_PROFILE, 0)
+
+            ' WICHTIG: Credentials als Nothing übergeben = Verwende aktuelle Windows-Credentials
+            ' Wenn der Share öffentlich oder mit aktuellen Credentials erreichbar ist, funktioniert es
+            Dim result As Integer = WNetAddConnection2(netResource, password, userName, flags)
+
+            Select Case result
+                Case ERROR_SUCCESS
+                    _Logger.Debug($"✓ Laufwerk {driveLetter} erfolgreich gemappt")
+                    Return True
+
+                Case 1326 ' ERROR_LOGON_FAILURE
+                    _Logger.Error($"❌ Authentifizierungsfehler (1326): Anmeldung fehlgeschlagen für [{networkPath}]")
+                    _Logger.Error($"   → Der UNC-Pfad erfordert möglicherweise spezielle Credentials")
+                    _Logger.Error($"   → Oder der aktuelle Benutzer hat keine Berechtigung")
+                    Return False
+
+                Case 53 ' ERROR_BAD_NETPATH
+                    _Logger.Error($"❌ Netzwerkpfad nicht gefunden (53): [{networkPath}]")
+                    Return False
+
+                Case 67 ' ERROR_BAD_NET_NAME
+                    _Logger.Error($"❌ Netzwerkname ungültig (67): [{networkPath}]")
+                    Return False
+
+                Case 85 ' ERROR_ALREADY_ASSIGNED
+                    _Logger.Warn($"⚠️ Laufwerk {driveLetter} ist bereits zugewiesen (85)")
+                    ' Versuche es zu trennen und erneut zu verbinden
+                    DisconnectNetworkDrive(driveLetter, force:=True)
+                    System.Threading.Thread.Sleep(500) ' Kurze Pause
+                    result = WNetAddConnection2(netResource, password, userName, flags)
+                    If result = ERROR_SUCCESS Then
+                        _Logger.Info($"✓ Laufwerk {driveLetter} nach erneutem Versuch erfolgreich gemappt")
+                        Return True
+                    Else
+                        Return False
+                    End If
+
+                Case Else
+                    _Logger.Error($"❌ WNetAddConnection2 Error Code: {result}")
+                    Return False
+            End Select
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler in MapNetworkDriveInternal: {ex.Message}")
+            _Logger.Error(ex)
+            Return False
+        End Try
+    End Function
+    ''' <summary>
+    ''' Test-Funktion um UNC-Pfad-Zugriff zu prüfen
+    ''' </summary>
+    Public Function TestUNCAccess(uncPath As String) As Boolean
+        Try
+            _Logger.Info($"🔍 Teste Zugriff auf UNC-Pfad: [{uncPath}]")
+
+            ' Teste ob Pfad existiert und erreichbar ist
+            If System.IO.Directory.Exists(uncPath) Then
+                _Logger.Info($"✓ UNC-Pfad ist direkt erreichbar ohne Mapping")
+
+                ' Teste Lese-Berechtigung
+                Try
+                    Dim files = System.IO.Directory.GetFiles(uncPath)
+                    _Logger.Info($"✓ Lese-Berechtigung vorhanden ({files.Length} Dateien gefunden)")
+                    Return True
+                Catch permEx As UnauthorizedAccessException
+                    _Logger.Error($"❌ Keine Lese-Berechtigung: {permEx.Message}")
+                    Return False
+                End Try
+            Else
+                _Logger.Error($"❌ UNC-Pfad nicht erreichbar oder existiert nicht")
+                Return False
+            End If
+
+        Catch ex As Exception
+            _Logger.Error($"❌ Fehler beim Testen des UNC-Zugriffs: {ex.Message}")
+            _Logger.Error(ex)
+            Return False
+        End Try
+    End Function
+    ''' <summary>
+    ''' Trennt ein Netzlaufwerk mit Windows-API
+    ''' </summary>
+    Public Function DisconnectNetworkDrive(driveLetter As String, Optional force As Boolean = True) As Boolean
+        Try
+            ' Formatierung sicherstellen
+            driveLetter = driveLetter.Trim().ToUpper()
+            If Not driveLetter.EndsWith(":") Then
+                driveLetter &= ":"
+            End If
+            Dim driveExists As Boolean = False
+            Try
+                Dim driveInfo As New System.IO.DriveInfo(driveLetter)
+                driveExists = driveInfo.IsReady
+            Catch
+                driveExists = False
+            End Try
+
+            If Not driveExists Then
+                _Logger.Debug($"ℹ️ Laufwerk {driveLetter} existiert nicht - Disconnect übersprungen")
+                Return True ' Kein Fehler, da das gewünschte Ergebnis erreicht ist (Laufwerk ist nicht verbunden)
+            End If
+
+            Dim flags As Integer = CONNECT_UPDATE_PROFILE
+            Dim result As Integer = WNetCancelConnection2(driveLetter, flags, force)
+
+            If result = ERROR_SUCCESS Then
+                _Logger.Debug($"✓ Netzlaufwerk {driveLetter} erfolgreich getrennt")
+                Return True
+            ElseIf result = 2250 Then ' ERROR_NOT_CONNECTED
+                ' Von WARN auf DEBUG herabgestuft, da es kein echter Fehler ist
+                _Logger.Debug($"ℹ️ Laufwerk {driveLetter} war nicht verbunden (Code 2250)")
+                Return True
+            ElseIf result = ERROR_ALREADY_ASSIGNED Then
+                _Logger.Debug($"ℹ️ Netzlaufwerk {driveLetter} war nicht verbunden")
+                Return True
+            Else
+                _Logger.Warn($"⚠️ Warnung beim Trennen von {driveLetter}: Error Code {result}")
+                Return False
+            End If
+
+        Catch ex As Exception
+            _Logger.Debug($"⚠️ Fehler beim Trennen von {driveLetter} (ignoriert): {ex.Message}")
+            Return False
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Ermittelt alle gemappten Netzlaufwerke
+    ''' </summary>
+    Public Function GetMappedNetworkDrives() As List(Of NetworkDriveInfo)
+        Dim mappedDrives As New List(Of NetworkDriveInfo)
+
+        Try
+            For Each drive As IO.DriveInfo In IO.DriveInfo.GetDrives()
+                If drive.DriveType = IO.DriveType.Network Then
+                    Dim driveInfo As New NetworkDriveInfo With {
+                        .DriveLetter = drive.Name,
+                        .NetworkPath = GetNetworkPath(drive.Name),
+                        .DriveType = drive.DriveType,
+                        .IsReady = drive.IsReady
+                    }
+
+                    If drive.IsReady Then
+                        Try
+                            driveInfo.TotalSize = drive.TotalSize
+                            driveInfo.FreeSpace = drive.AvailableFreeSpace
+                        Catch ex As Exception
+                            _Logger.Debug($"Konnte Größeninformationen für {drive.Name} nicht ermitteln: {ex.Message}")
+                        End Try
+                    End If
+
+                    mappedDrives.Add(driveInfo)
+                End If
+            Next
+
+            _Logger.Debug($"Insgesamt {mappedDrives.Count} Netzlaufwerk(e) gefunden")
+            Return mappedDrives
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler beim Ermitteln der Netzlaufwerke: {ex.Message}")
+            _Logger.Error(ex)
+            Return mappedDrives
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Ermittelt den UNC-Pfad eines gemappten Laufwerks
+    ''' </summary>
+    Public Function GetNetworkPath(driveLetter As String) As String
+        Try
+            driveLetter = driveLetter.Trim().ToUpper()
+            If Not driveLetter.EndsWith(":") Then
+                driveLetter &= ":"
+            End If
+
+            Dim network As Object = CreateObject("WScript.Network")
+            Dim enumDrives As Object = network.EnumNetworkDrives()
+
+            For i As Integer = 0 To enumDrives.Count - 1 Step 2
+                If enumDrives.Item(i).ToString.Equals(driveLetter, StringComparison.OrdinalIgnoreCase) Then
+                    Return enumDrives.Item(i + 1).ToString()
+                End If
+            Next
+
+            Return String.Empty
+
+        Catch ex As Exception
+            _Logger.Debug($"Fehler beim Ermitteln des Netzwerkpfads für {driveLetter}: {ex.Message}")
+            Return String.Empty
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Prüft ob ein bestimmtes Laufwerk als Netzlaufwerk gemappt ist
+    ''' </summary>
+    Public Shared Function IsDriveMapped(driveLetter As String) As Boolean
+        Try
+            driveLetter = driveLetter.Trim().ToUpper()
+            If Not driveLetter.EndsWith(":") Then
+                driveLetter &= ":"
+            End If
+            If Not driveLetter.EndsWith("\") Then
+                driveLetter &= "\"
+            End If
+
+            Dim driveInfo As New IO.DriveInfo(driveLetter)
+            Return driveInfo.DriveType = IO.DriveType.Network AndAlso driveInfo.IsReady
+
+        Catch ex As Exception
+            Return False
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Gibt eine formatierte Übersicht aller gemappten Netzlaufwerke zurück
+    ''' </summary>
+    Public Function GetMappedDrivesInfo() As String
+        Dim result As New System.Text.StringBuilder()
+        Dim drives = GetMappedNetworkDrives()
+
+        If drives.Count = 0 Then
+            Return "Keine Netzlaufwerke gefunden."
+        End If
+
+        result.AppendLine($"Gemappte Netzlaufwerke ({drives.Count}):")
+        result.AppendLine(New String("-"c, 60))
+
+        For Each drive In drives
+            result.AppendLine($"Laufwerk: {drive.DriveLetter}")
+            result.AppendLine($"  Pfad: {drive.NetworkPath}")
+            result.AppendLine($"  Status: {If(drive.IsReady, "Verfügbar", "Nicht verfügbar")}")
+
+            If drive.IsReady AndAlso drive.TotalSize > 0 Then
+                Dim totalGB As Double = drive.TotalSize / (1024.0 ^ 3)
+                Dim freeGB As Double = drive.FreeSpace / (1024.0 ^ 3)
+                result.AppendLine($"  Größe: {totalGB:N2} GB (Frei: {freeGB:N2} GB)")
+            End If
+
+            result.AppendLine()
+        Next
+
+        Return result.ToString()
+    End Function
+    ''' <summary>
+    ''' Mappt ein spezifisches Laufwerk (z.B. "V") mit Blacklist-Prüfung
+    ''' </summary>
+    Public Function MapSpecificDrive(driveLetter As String, blacklist As String, networkPath As String) As Boolean
+        Try
+            ' Formatierung sicherstellen
+            driveLetter = driveLetter.Trim().ToUpper().Replace(":", "")
+
+            If String.IsNullOrEmpty(driveLetter) OrElse driveLetter.Length <> 1 Then
+                _Logger.Warn($"⚠️ Ungültiger Laufwerksbuchstabe: [{driveLetter}]")
+                Return False
+            End If
+
+            Dim driveWithColon As String = driveLetter & ":"
+
+            ' Prüfen ob Laufwerk verfügbar ist
+            If Not IsDriveLetterAvailable(driveWithColon, blacklist) Then
+                _Logger.Warn($"⚠️ Laufwerk {driveWithColon} ist nicht verfügbar (bereits verwendet oder in Blacklist)")
+                Return False
+            End If
+
+            ' UNC-Pfad vorbereiten (ohne abschließenden Backslash)
+            Dim uncPath As String = networkPath.TrimEnd("\"c)
+
+            ' Laufwerk mappen (OHNE Credentials, persistent=False für temporäres Mapping)
+            Dim result = MapNetworkDrive(driveWithColon, uncPath, blacklist, userName:=Nothing, password:=Nothing, persistent:=False)
+
+            If Not String.IsNullOrEmpty(result) Then
+                _Logger.Debug($"✓ Laufwerk {driveWithColon} erfolgreich gemappt zu [{uncPath}]")
+                Return True
+            Else
+                _Logger.Error($"❌ Fehler beim Mappen von {driveWithColon}")
+                Return False
+            End If
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler in MapSpecificDrive: {ex.Message}")
+            _Logger.Error(ex)
+            Return False
+        End Try
+    End Function
+
+    ''' <summary>
+    ''' Mappt automatisch den nächsten freien Laufwerksbuchstaben (Z→A)
+    ''' </summary>
+    Public Function MapDriveAutomatic(blacklist As String, networkPath As String) As String
+        Try
+            ' UNC-Pfad vorbereiten (ohne abschließenden Backslash)
+            Dim uncPath As String = networkPath.TrimEnd("\"c)
+
+            _Logger.Debug($"🔍 Suche automatisch freien Laufwerksbuchstaben...")
+            _Logger.Debug($"   Blacklist: [{blacklist}]")
+            _Logger.Debug($"   Netzwerkpfad: [{uncPath}]")
+
+            ' Automatisches Mapping (leer = automatische Auswahl, persistent=False)
+            Dim result = MapNetworkDrive("", uncPath, blacklist, userName:=Nothing, password:=Nothing, persistent:=False)
+
+            If Not String.IsNullOrEmpty(result) Then
+                _Logger.Debug($"✓ Automatisch gewähltes Laufwerk: {result}")
+                Return result
+            Else
+                _Logger.Error($"❌ Kein freier Laufwerksbuchstabe verfügbar")
+                Return String.Empty
+            End If
+
+        Catch ex As Exception
+            _Logger.Error($"Fehler in MapDriveAutomatic: {ex.Message}")
+            _Logger.Error(ex)
+            Return String.Empty
+        End Try
+    End Function
+
+End Class

Base/ModuleExtensions.vb

@@ -2,6 +2,7 @@
 Imports System.Web
 
 Public Module ModuleExtensions
+    Public TEMP_DOCUMENT_FOLDER As String = System.IO.Path.Combine(System.IO.Path.GetTempPath(), "Documents")
     Const UnixEraStartTicks As Long = 621355968000000000
 
     ' ======================================================

Base/My Project/AssemblyInfo.vb

@@ -31,5 +31,5 @@ Imports System.Runtime.InteropServices
 ' indem Sie "*" wie unten gezeigt eingeben:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("1.3.9.0")>
-<Assembly: AssemblyFileVersion("1.3.9.0")>
+<Assembly: AssemblyVersion("1.4.0.0")>
+<Assembly: AssemblyFileVersion("1.4.0.0")>

License/Licensebackup.vbproj

@@ -0,0 +1,134 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{5EBACBFA-F11A-4BBF-8D02-91461F2293ED}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <RootNamespace>DigitalData.Modules.License</RootNamespace>
+    <AssemblyName>DigitalData.Modules.License</AssemblyName>
+    <FileAlignment>512</FileAlignment>
+    <MyType>Windows</MyType>
+    <TargetFrameworkVersion>net462</TargetFrameworkVersion>
+    <TargetFrameworkProfile />
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DocumentationFile>DigitalData.Modules.License.xml</DocumentationFile>
+    <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <DefineDebug>false</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DocumentationFile>DigitalData.Modules.License.xml</DocumentationFile>
+    <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionExplicit>On</OptionExplicit>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionCompare>Binary</OptionCompare>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionStrict>Off</OptionStrict>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionInfer>On</OptionInfer>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="NLog, Version=5.0.0.0, Culture=neutral, PublicKeyToken=5120e14c03d0593c, processorArchitecture=MSIL">
+      <HintPath>..\packages\NLog.5.0.5\lib\net46\NLog.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Configuration" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.IO.Compression" />
+    <Reference Include="System.Runtime.Serialization" />
+    <Reference Include="System.ServiceModel" />
+    <Reference Include="System.Transactions" />
+    <Reference Include="System.Xml" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Net.Http" />
+  </ItemGroup>
+  <ItemGroup>
+    <Import Include="Microsoft.VisualBasic" />
+    <Import Include="System" />
+    <Import Include="System.Collections" />
+    <Import Include="System.Collections.Generic" />
+    <Import Include="System.Data" />
+    <Import Include="System.Diagnostics" />
+    <Import Include="System.Linq" />
+    <Import Include="System.Xml.Linq" />
+    <Import Include="System.Threading.Tasks" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="LicenseCreator.vb" />
+    <Compile Include="LicenseFile.vb" />
+    <Compile Include="LicenseLegacy.vb" />
+    <Compile Include="LicenseManagerLegacy.vb" />
+    <Compile Include="LicenseSchema.vb">
+      <DependentUpon>LicenseSchema.xsd</DependentUpon>
+    </Compile>
+    <Compile Include="LicensesLegacy.vb" />
+    <Compile Include="My Project\AssemblyInfo.vb" />
+    <Compile Include="My Project\Application.Designer.vb">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Application.myapp</DependentUpon>
+      <DesignTime>True</DesignTime>
+    </Compile>
+    <Compile Include="My Project\Resources.Designer.vb">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="My Project\Settings.Designer.vb">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <EmbeddedResource Include="My Project\Resources.resx">
+      <Generator>VbMyResourcesResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.vb</LastGenOutput>
+      <CustomToolNamespace>My.Resources</CustomToolNamespace>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="LicenseSchema.xsd">
+      <SubType>Designer</SubType>
+    </None>
+    <None Include="My Project\Application.myapp">
+      <Generator>MyApplicationCodeGenerator</Generator>
+      <LastGenOutput>Application.Designer.vb</LastGenOutput>
+    </None>
+    <None Include="My Project\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <CustomToolNamespace>My</CustomToolNamespace>
+      <LastGenOutput>Settings.Designer.vb</LastGenOutput>
+    </None>
+    <None Include="packages.config" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Logging\Logging.vbproj">
+      <Project>{903b2d7d-3b80-4be9-8713-7447b704e1b0}</Project>
+      <Name>Logging</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
+  <PropertyGroup>
+    <PostBuildEvent>powershell.exe -command "&amp; { &amp;'$(SolutionDir)copy-binary.ps1' '$(TargetPath)' '$(TargetFileName)' '$(ConfigurationName)' '$(ProjectName)' }"</PostBuildEvent>
+  </PropertyGroup>
+</Project>

Messaging/Messaging.vbproj

@@ -47,9 +47,8 @@
     <Reference Include="DigitalData.Modules.Logging, Version=2.6.5.0, Culture=neutral, processorArchitecture=MSIL">
       <HintPath>..\packages\DigitalData.Modules.Logging.2.6.5\lib\net462\DigitalData.Modules.Logging.dll</HintPath>
     </Reference>
-    <Reference Include="Mail, Version=3.0.25239.1527, Culture=neutral, PublicKeyToken=6dc438ab78a525b3, processorArchitecture=MSIL">
-      <SpecificVersion>False</SpecificVersion>
-      <HintPath>P:\Projekte DIGITAL DATA\DIGITAL DATA - Entwicklung\DLL_Bibliotheken\Limilabs\Mail.dll</HintPath>
+    <Reference Include="Mail">
+      <HintPath>M:\Bibliotheken\3rdParty\Limilabs\Mail.dll</HintPath>
     </Reference>
     <Reference Include="Microsoft.CSharp" />
     <Reference Include="Microsoft.Identity.Client, Version=4.55.0.0, Culture=neutral, PublicKeyToken=0a613f4dd989e8ae, processorArchitecture=MSIL">

Modules.sln

@@ -16,6 +16,9 @@ EndProject
 Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "Interfaces", "Interfaces\Interfaces.vbproj", "{AB6F09BF-E794-4F6A-94BB-C97C0BA84D64}"
 EndProject
 Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "Jobs", "Jobs\Jobs.vbproj", "{39EC839A-3C30-4922-A41E-6B09D1DDE5C3}"
+	ProjectSection(ProjectDependencies) = postProject
+		{AB6F09BF-E794-4F6A-94BB-C97C0BA84D64} = {AB6F09BF-E794-4F6A-94BB-C97C0BA84D64}
+	EndProjectSection
 EndProject
 Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "License", "License\License.vbproj", "{5EBACBFA-F11A-4BBF-8D02-91461F2293ED}"
 EndProject

Patterns/Patterns.vbproj

@@ -57,7 +57,7 @@
       <HintPath>..\packages\DigitalData.Modules.Logging.2.6.5\lib\net462\DigitalData.Modules.Logging.dll</HintPath>
     </Reference>
     <Reference Include="Interop.WINDREAMLib">
-      <HintPath>P:\Visual Studio Projekte\Bibliotheken\windream\Interop.WINDREAMLib.dll</HintPath>
+      <HintPath>M:\Bibliotheken\3rdParty\windream\Interop.WINDREAMLib.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
     <Reference Include="Microsoft.CSharp" />

Windows/Windows.vbproj

@@ -44,13 +44,18 @@
     <OptionInfer>On</OptionInfer>
   </PropertyGroup>
   <ItemGroup>
-    <Reference Include="DigitalData.Modules.Logging, Version=2.6.5.0, Culture=neutral, processorArchitecture=MSIL">
-      <HintPath>..\packages\DigitalData.Modules.Logging.2.6.5\lib\net462\DigitalData.Modules.Logging.dll</HintPath>
-    </Reference>
     <Reference Include="Microsoft.CSharp" />
+    <Reference Include="Microsoft.Office.Interop.Outlook">
+      <HintPath>M:\Bibliotheken\3rdParty\Office\Microsoft.Office.Interop.Outlook.dll</HintPath>
+      <EmbedInteropTypes>True</EmbedInteropTypes>
+    </Reference>
     <Reference Include="NLog, Version=5.0.0.0, Culture=neutral, PublicKeyToken=5120e14c03d0593c, processorArchitecture=MSIL">
       <HintPath>..\packages\NLog.5.0.5\lib\net46\NLog.dll</HintPath>
     </Reference>
+    <Reference Include="OFFICE">
+      <HintPath>M:\Bibliotheken\3rdParty\Office\OFFICE.DLL</HintPath>
+      <EmbedInteropTypes>True</EmbedInteropTypes>
+    </Reference>
     <Reference Include="PresentationCore" />
     <Reference Include="System" />
     <Reference Include="System.Configuration" />
@@ -141,26 +146,12 @@
       <Project>{6ea0c51f-c2b1-4462-8198-3de0b32b74f8}</Project>
       <Name>Base</Name>
     </ProjectReference>
+    <ProjectReference Include="..\Logging\Logging.vbproj">
+      <Project>{903b2d7d-3b80-4be9-8713-7447b704e1b0}</Project>
+      <Name>Logging</Name>
+    </ProjectReference>
   </ItemGroup>
   <ItemGroup>
-    <COMReference Include="Microsoft.Office.Core">
-      <Guid>{2DF8D04C-5BFA-101B-BDE5-00AA0044DE52}</Guid>
-      <VersionMajor>2</VersionMajor>
-      <VersionMinor>8</VersionMinor>
-      <Lcid>0</Lcid>
-      <WrapperTool>primary</WrapperTool>
-      <Isolated>False</Isolated>
-      <EmbedInteropTypes>True</EmbedInteropTypes>
-    </COMReference>
-    <COMReference Include="Microsoft.Office.Interop.Outlook">
-      <Guid>{00062FFF-0000-0000-C000-000000000046}</Guid>
-      <VersionMajor>9</VersionMajor>
-      <VersionMinor>6</VersionMinor>
-      <Lcid>0</Lcid>
-      <WrapperTool>primary</WrapperTool>
-      <Isolated>False</Isolated>
-      <EmbedInteropTypes>True</EmbedInteropTypes>
-    </COMReference>
     <COMReference Include="stdole">
       <Guid>{00020430-0000-0000-C000-000000000046}</Guid>
       <VersionMajor>2</VersionMajor>

Windream/Windream.vbproj

@@ -47,20 +47,21 @@
     <Reference Include="DigitalData.Modules.Logging, Version=2.6.5.0, Culture=neutral, processorArchitecture=MSIL">
       <HintPath>..\packages\DigitalData.Modules.Logging.2.6.5\lib\net462\DigitalData.Modules.Logging.dll</HintPath>
     </Reference>
-    <Reference Include="Interop.WINDREAMLib">
-      <HintPath>P:\Visual Studio Projekte\Bibliotheken\windream\Interop.WINDREAMLib.dll</HintPath>
-      <EmbedInteropTypes>False</EmbedInteropTypes>
+    <Reference Include="Interop.WINDREAMLib, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <EmbedInteropTypes>True</EmbedInteropTypes>
+      <HintPath>M:\Bibliotheken\3rdParty\windream\Interop.WINDREAMLib.dll</HintPath>
     </Reference>
     <Reference Include="Interop.WMCNNCTDLLLib">
-      <HintPath>P:\Visual Studio Projekte\Bibliotheken\windream\Interop.WMCNNCTDLLLib.dll</HintPath>
+      <HintPath>M:\Bibliotheken\3rdParty\windream\Interop.WMCNNCTDLLLib.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
     <Reference Include="Interop.WMOSRCHLib">
-      <HintPath>P:\Visual Studio Projekte\Bibliotheken\windream\Interop.WMOSRCHLib.dll</HintPath>
+      <HintPath>M:\Bibliotheken\3rdParty\windream\Interop.WMOSRCHLib.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
     <Reference Include="Interop.WMOTOOLLib">
-      <HintPath>P:\Visual Studio Projekte\Bibliotheken\windream\Interop.WMOTOOLLib.dll</HintPath>
+      <HintPath>M:\Bibliotheken\3rdParty\windream\Interop.WMOTOOLLib.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
     <Reference Include="Microsoft.CSharp" />

ZooFlow/Environment.vb

@@ -1,5 +1,4 @@
 Imports DigitalData.Modules.Database
-
 Public Class Environment
     Public Property User As New State.UserState
     Public Property Settings As New State.SettingsState

ZooFlow/My Project/AssemblyInfo.vb

@@ -31,5 +31,5 @@ Imports System.Runtime.InteropServices
 ' übernehmen, indem Sie "*" eingeben:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("1.3.0.0")>
-<Assembly: AssemblyFileVersion("1.3.0.0")>
+<Assembly: AssemblyVersion("1.4.0.0")>
+<Assembly: AssemblyFileVersion("1.4.0.0")>

ZooFlow/State/SettingsState.vb

@@ -1,5 +1,9 @@
 Namespace State
     Public Class SettingsState
         Public GdPictureKey As String = String.Empty
+        Public CopyWMFile2Temp As Boolean = False
+        Public WM_SUFFIX As String = "\\WINDREAM\OBJECTS"
+        Public MAP_SHAREDRIVE As String = ""
+        Public MAP_BLACKLIST As String = ""
     End Class
 End Namespace

ZooFlow/ZooFlow.vbproj

@@ -44,18 +44,6 @@
     <OptionInfer>On</OptionInfer>
   </PropertyGroup>
   <ItemGroup>
-    <Reference Include="DigitalData.Modules.Database">
-      <HintPath>..\Database\bin\Debug\DigitalData.Modules.Database.dll</HintPath>
-    </Reference>
-    <Reference Include="DigitalData.Modules.EDMI.API">
-      <HintPath>P:\Projekte DIGITAL DATA\DIGITAL DATA - Entwicklung\DLL_Bibliotheken\Digital Data\DD_Modules\DigitalData.Modules.EDMI.API.dll</HintPath>
-    </Reference>
-    <Reference Include="DigitalData.Modules.Logging">
-      <HintPath>..\Logging\bin\Debug\DigitalData.Modules.Logging.dll</HintPath>
-    </Reference>
-    <Reference Include="DigitalData.Modules.Windows">
-      <HintPath>..\Windows\bin\Debug\DigitalData.Modules.Windows.dll</HintPath>
-    </Reference>
     <Reference Include="Microsoft.CSharp" />
     <Reference Include="NLog, Version=5.0.0.0, Culture=neutral, PublicKeyToken=5120e14c03d0593c, processorArchitecture=MSIL">
       <HintPath>..\packages\NLog.5.0.5\lib\net46\NLog.dll</HintPath>
@@ -135,6 +123,24 @@
     </None>
     <None Include="packages.config" />
   </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Database\Database.vbproj">
+      <Project>{eaf0ea75-5fa7-485d-89c7-b2d843b03a96}</Project>
+      <Name>Database</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\EDMIAPI\EDMI.API.vbproj">
+      <Project>{25017513-0d97-49d3-98d7-ba76d9b251b0}</Project>
+      <Name>EDMI.API</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\Logging\Logging.vbproj">
+      <Project>{903b2d7d-3b80-4be9-8713-7447b704e1b0}</Project>
+      <Name>Logging</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\Windows\Windows.vbproj">
+      <Project>{5efaef9b-90b9-4f05-9f70-f79ad77fff86}</Project>
+      <Name>Windows</Name>
+    </ProjectReference>
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>powershell.exe -command "&amp; { &amp;'$(SolutionDir)copy-binary.ps1' '$(TargetPath)' '$(TargetFileName)' '$(ConfigurationName)' '$(ProjectName)' }"</PostBuildEvent>